Mens Wetsuits

3/4oz Aquaseal Urethane Repair Adhesive & Sealant The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. DIRECTIONS FOR NEOPRENE REPAIR: Clean damaged area with solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure. SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces. HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance. WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying. CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.

The 1.5mm Hyperflex Webbed Paddle Gloves offer a great balance of warmth and propulsion. Excellent for swim and paddle training, surfing, or anything you can think of. Not triathlon legal!

Wetsuit Hanger Flexible wet suit and dry suit hanger prolongs the life of your wet suit or dry suit by conforming to any suit design. Unique Memory Foam bends and molds to your suit's exact shape. Eliminates seam stress, suit slippage and creases in neoprene. Disassembles for travel convenience. Flex Fashion Hanger Directions For Use: ASSEMBLY INSTRUCTIONS If your hanger is unassembled, simply rotate the stainless steel sleeve, matching the hole with the internal support mechanism. Thread the hook into the internal support. The hook may be left loose to allow a swivel effect or be fully tightened. BENDING INSTRUCTIONS To match your custom wet suit or dry suit design, bend one arm of the hanger at a time. For best results, bend your hanger by hand or over the knee. CARE AND MAINTENANCE Periodically rinse the entire hanger with fresh water and towel dry.

The 5/3mm bibbed hood turns a regular fullsuit into a hooded suit. Sealed seams keep your head nice and toasty on the coldest days. Hood Sizes S M L XL Neck 13" 14" 15.25" 16.25" Head 20" 22" 23" 24

The men\'s O\'neill Skins vest is made of 91%nylon/9%spandex. It features a UV protection, sleeveless, a screened logo at the chest and back shoulder, a boardshort connector, and a fluid seam weld.

The men\'s O\'neill Skins vest is made of 91%nylon/9%spandex. It features a UV protection, sleeveless, a screened logo at the chest and back shoulder, a boardshort connector, and a fluid seam weld.

Zoot Sports' TRIfit mesh zip neck shirt provides excellent comfort, with fast-drying nylon and spandex stretch for mobility and fit.

Designed specifically for the multi-sport needs of the triathlete, the men's ZOOT TriFit Mesh Triathlon Top is lightweight, features a 10" cam lock front zipper, and side stash pockets for your essent

Blue Seventy SPECTRA Tri Brief - Made in the USA! The Blue Seventy SPECTRA Jammer is engineered for fit and function with fuller sides than a traditional Speedo, and double front paneling for extra support. -Cutting edge XLA fabric provides longer life and better compression than standard poly and extra life lycra, making your suit fit better for longer-Swimmer inspired designs cut for performance -Italian and US milled fabric, made in the USA -100% nylon lining for exceptional strength comfort and durability -50+ UV protection. *This product is not a wetsuit and will not keep you warm. Swimsuit only

Blue Seventy SPECTRA Tri Jammer - Made in the USA! The Blue Seventy SPECTRA Jammer is engineered for fit and function with a longer cut for better coverage and double front paneling for extra support. -Cutting edge XLA fabric provides longer life and better compression than standard poly and extra life lycra, making your suit fit better for longer-Swimmer inspired designs cut for performance -Italian and US milled fabric, made in the USA -100% nylon lining for exceptional strength comfort and durability -50+ UV protection. *This product is not a wetsuit and will not keep you warm. Swimsuit only

The men's O'neill Hammer vest features exceptional styling, an unrestricted movement, 100%fluid flex, and O'neills exclusive high-stretch neoprene.

This fine Italian fabric provides moisturemanagement through vapor-channel construction.It is lightweight, very opaque, and especially resistant to abrasion and pilling. This 40 gauge fabric is quick